Ayn Odin 2
Software
| Device |
CPU / Architecture |
Kernel |
GL driver |
Vulkan driver |
Interface |
| Ayn Odin 2 (Base / Pro / Max) |
Qualcomm 8gen2 (SM8550) |
Mainline Linux |
Freedreno |
Turnip |
Sway + REG-ES |
Features
| Feature |
Notes |
| Wifi |
Can be turned on in REG-ES under Main Menu > Network Settings |
| Bluetooth |
Supports bluetooth audio and controllers |
| Fan |
Can be set globally, per system or per game. |
| Joystick LEDS |
Supports selecting from a set of colors, battery level status, or turning the joystick LEDS off. |
| Rumble |
Can be turned on or off in REG-ES under Controller & Bluetooth Settings > Enable Rumble |
Ayn Boot Selection for Linux
Requires Ayn Odin 2 Firmware v1.0.0.355 or newer which adds support for Linux boot selection.
- Power off the Odin 2 and insert your SD Card with REG Linux flashed on it
- While holding down the VOL- button, press the power button and hold both buttons until you see the Ayn Log
- The device should show the FastBoot Menu
- Use the volume button to navigate the menu and change the BOOT MODE to Loader
- Press power key to select START
- Device will then boot into REG Linux off the SD Card
Additional References